Page 2 of 2 FirstFirst 12
Results 21 to 24 of 24

Thread: 29.5cc wild child

  1. #21
    Baja-Forum Maniac Hosster's Avatar
    Join Date
    Jan 2010
    Location
    Hosstershire
    Posts
    4,495

    Default

    Quote Originally Posted by Underdog View Post
    You could drill a new hole with a washer. I don't recommend cutting it. The cover directs the air flow around the entire cylinder. Cutting it may cause hot spots in the cylinder.
    On the side of caution it MAY cause heat spots, but doubtful, the air is blown over the entire head, personally never had an issue, I'd be more worried about the affect of a flywheel lightened by milling down the fins TBH

  2. #22
    Senior Member dogtown's Avatar
    Join Date
    Jun 2011
    Location
    northants
    Posts
    685

    Default

    well now the lumps all run iun nice im starting to think about gearing, the stock gearing works rather well, any reccomendations?
    if its got tits or gears its going to be expensive

  3. #23
    Baja-Forum Maniac Corbs10's Avatar
    Join Date
    Sep 2010
    Location
    Wrexham
    Posts
    2,530

    Default

    Quote Originally Posted by dogtown View Post
    well now the lumps all run iun nice im starting to think about gearing, the stock gearing works rather well, any reccomendations?
    18/56 i think is the best with 19/55 for speed runs

  4. #24
    Advertiser Underdog's Avatar
    Join Date
    Oct 2010
    Location
    Upstate, NY USA
    Posts
    104

    Default

    18/56 is my favorite all around set up on that engine. I mainly run oval with them. 19/55 is a bit too much speed coming into the corners.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •