Results 1 to 12 of 12

Thread: DarkSoul Racing v.4 Bones for the Baja SC

  1. #1
    Advertiser
    Join Date
    Nov 2009
    Location
    San Jose, California, USA
    Posts
    130

    Default DarkSoul Racing v.4 Bones for the Baja SC

    They are finally done, and should be leaving for TGN, DDM, and the rest of our dealer network most likely by tomorrow .

    The new DS v.4 SC Bones, made from 4130 Chromoly steel like our other bones, heat treated for strength, and utilizing our innovative ultra strong captive flat pin design. The new SC bones are approximately 1mm larger in diameter than our v.3 bones. The v.4 taper from 8.3mm to 8.9mm and weigh in at 91g. vs. 92g. for the stock HPI SC bones. So a massive gain in strength but with no weight penalty.

    The gold color is the natural color after heat treating, normally we bead blast them when done, but this adds expense to the end product, and we feel that you would rather save some money instead of a bead blasted dogbone. The bones are coated with a teflon coating to keep them from rusting, but if you run in wet or salty conditions (at the beach for instance) you will need to wipe down the bones and spray them with some WD40 or some other form of protective spray.






    Street Price should be at approximately $82.00, and like the rest of our dogbones, they come with a lifetime warranty on the bones (pins not covered by warranty). We believe the DarkSoul dogbones to be the best value for your money, and this value continues when you utilize our TOOBZ to reinforce your stock drive cups. TOOBZ are available for both the stock size and SC size drive cups.

  2. #2
    BFUK-aholic™ Echlin W's Avatar
    Join Date
    Dec 2009
    Posts
    6,018

    Default

    Looking good.

  3. #3
    Now then, It's TOPPER! Topper's Avatar
    Join Date
    Oct 2009
    Location
    South
    Posts
    11,573

    Default

    Jesus. Thought my V2's were big! those things are huge

  4. #4
    Adminicastrator Hiks's Avatar
    Join Date
    Oct 2009
    Location
    Manchester
    Posts
    6,429

    Default

    SC drivetrain is looking a good option now once you beef it up some.

    Nice work.

  5. #5
    Moderator The Trooper's Avatar
    Join Date
    Mar 2010
    Location
    Selkirk, Scottish Borders
    Posts
    6,233

    Default

    Damn, why did i have to buy v2 cups/toobz when i could've had this set up

    Feedback: BFUK, MSUK

  6. #6
    BFUK-aholic™ Echlin W's Avatar
    Join Date
    Dec 2009
    Posts
    6,018

    Default

    That word ''dumbass'' follow's you around does'nt it

  7. #7
    Baja-Forum Maniac original.mb's Avatar
    Join Date
    Oct 2009
    Posts
    1,012

    Default

    Good to see the new improved V4'S Ted, they look beefy as and thats a fair street price as well fella

  8. #8
    Member
    Join Date
    Mar 2015
    Location
    Gillingham, Kent
    Posts
    126

    Default

    I got a set of these last week and they are awesome.

    Had to dremel the pins back to fit with the toobz and also fitted hemiboots with fast eddy greese so proper beefed up now and hopefully will last a very long time!!

    Slight downside is the cost of the pins!!! £20 for 4 new pins!

  9. #9
    Member
    Join Date
    Nov 2015
    Location
    bristol
    Posts
    447

    Default

    Quote Originally Posted by calibra306 View Post
    I got a set of these last week and they are awesome.

    Had to dremel the pins back to fit with the toobz and also fitted hemiboots with fast eddy greese so proper beefed up now and hopefully will last a very long time!!

    Slight downside is the cost of the pins!!! £20 for 4 new pins!
    where did u buy from matey???
    My rc's -Scott fin g32 pro-mx Baja--2200kv super mt4g3--2000kv savage flux alza xl--5.2cc irc savage--1850kv hyper7--- lwb carson touring car,----kv lwb Carson touring car--ta-03f 1996 mcray Scooby--Vintage 1987 Tamiya striker--vintage 1983 Tamiya frog--vintage 1985 tamiya fox--zen29cc losi5--

  10. #10
    Baja-Forum Maniac llazaru's Avatar
    Join Date
    Apr 2012
    Location
    EAST YORKS.
    Posts
    4,712

    Default

    Quote Originally Posted by evssv View Post
    where did u buy from matey???
    http://abbotsrc.co.uk/Darksoul-V4-SC...-P2310309.aspx

    Don't forget to use discount code

  11. #11
    Member
    Join Date
    Nov 2015
    Location
    bristol
    Posts
    447

    Default

    Quote Originally Posted by llazaru View Post
    bit rich for me atm...jus got sum flm ones ....
    My rc's -Scott fin g32 pro-mx Baja--2200kv super mt4g3--2000kv savage flux alza xl--5.2cc irc savage--1850kv hyper7--- lwb carson touring car,----kv lwb Carson touring car--ta-03f 1996 mcray Scooby--Vintage 1987 Tamiya striker--vintage 1983 Tamiya frog--vintage 1985 tamiya fox--zen29cc losi5--

  12. #12
    Member
    Join Date
    Mar 2015
    Location
    Gillingham, Kent
    Posts
    126

    Default

    I'd ordered from everywhere. Prob MMR or freepawn racing or abbotts
    "It's not what you drive it's how you drive!"

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •