I've developed some counter sunk washers for the front e-clip mod ,I've made these washers from aircraft spec aluminium ,due to they're size they also act as an extra dust shield for the front bearings

The kit consists of two counter sunk washers and two counter sunk socket cap bolts .







Fitted to the front hubs







To utilise this kit you need too tap out the front hubs too accept the M5 countersunk bolt ,the hub needs to be drilled 4.2mm and a thread cut with an M5 tap, if your not confidant with your D.I.Y skills I can thread your front hubs for a small fee.


Front hubs with an M5 thread.





Pm for price and availability