Results 1 to 4 of 4

Thread: Fruitbat cuffs

  1. #1
    Advertiser rs fruitbat's Avatar
    Join Date
    Nov 2011
    Location
    West wales
    Posts
    914

    Default Fruitbat cuffs

    I've developed some rear cuffs to offer more support around the weak area between the rear upper wishbone and ball joint , the cuff takes up the 'open space ' between the balljoint and rear upper wishbone allowing the ball joint to be tightened up to the cuff ,therefore eliminating the weakness .


    These cuffs come with a standard spacing of 11mm ,but I can make these bespoke too your requirements depending on your set up .







    Cuff Fitted too the standard balljoint ,but these cuffs can fit aftermarket ball joints too .







    Fitted to my baja.










    Below a pic of the cuff fitted too an aftermarket balljoint








    Pm me for price and your requirements ie standard spacing or bespoke
    Last edited by rs fruitbat; 17-08-2013 at 19:40.

    Flywheel lightening service, manufacturer of ,baja cage risers,piston stops ,H/D spring perches for Standard shocks and IRC shocks ,rear cuffs ,spiked wheel nuts for the baja and losi 5ive ,general machining offered for all your baja needs pm for details

    http://www.baja-forum.co.uk/forumdis...Fruitbat-Parts

    Now on Facebook

    https://www.facebook.com/groups/1594860060733732/

  2. #2
    Junior Member
    Join Date
    Apr 2015
    Posts
    17

    Default

    may i know the measurement is the same with Hemistorm's HemiCuffs or not?

  3. #3
    Baja-Forum Maniac llazaru's Avatar
    Join Date
    Apr 2012
    Location
    EAST YORKS.
    Posts
    4,720

    Default

    Quote Originally Posted by nuurulhakim View Post
    may i know the measurement is the same with Hemistorm's HemiCuffs or not?
    The stock spacing is 11mm, if your running aftermarket rod ends these can vary in length, set your camber as you like it then measure spacing and order to suit

  4. #4
    Senior Member CatalinU's Avatar
    Join Date
    Aug 2015
    Location
    Dublin,Cluj-Napoca
    Posts
    639

    Default

    Whats the price of that for a stock balljoint?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •