Results 1 to 6 of 6

Thread: Hinge pin set

  1. #1
    Junior Member
    Join Date
    Oct 2014
    Location
    Leicester
    Posts
    18

    Default Hinge pin set

    Hi when will you have any more full hinge pin sets back in stock?

  2. #2
    Member
    Join Date
    Oct 2014
    Location
    Tetbury/UK
    Posts
    93

    Default

    If you email Rob from his site he will get back to you..

  3. #3
    Junior Member
    Join Date
    Oct 2014
    Location
    Leicester
    Posts
    18

    Default

    Nice one will get on that

  4. #4
    Senior Member CatalinU's Avatar
    Join Date
    Aug 2015
    Location
    Dublin,Cluj-Napoca
    Posts
    639

    Default

    Is anyone using threadlock on the hinge pins?

  5. #5
    Baja-Forum Maniac coalminer's Avatar
    Join Date
    Jun 2011
    Location
    Mansfield ,Nottinghamshire
    Posts
    1,497

    Default

    Quote Originally Posted by CatalinU View Post
    Is anyone using threadlock on the hinge pins?
    Only use thread lock on one end mate, which is the end towards the outer of the car. You need to be able to remove the stud on the inside of the pin easily or you can get into a mess when you try and get it out and end up stripping the car to bits to get the pins out.

    Remember ....threadlock on the end of the pin that you want to be able to pull it out.

    And I've never bothered thread locking the pins in the rear hub carriers at all....never had a stud fall out.
    Last edited by coalminer; 22-06-2017 at 09:16.

  6. #6
    Senior Member CatalinU's Avatar
    Join Date
    Aug 2015
    Location
    Dublin,Cluj-Napoca
    Posts
    639

    Default

    Allright.Will use threadlock on the outside o the pin.At the project i am doing now will use threadlock,but in my car,i had thread lock on the pins(kraken pins) and i lost one of my screws even with threadlock.Thx for the tip

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •