Results 1 to 4 of 4

Thread: Pins

  1. #1
    Senior Member
    Join Date
    Apr 2010
    Location
    durham
    Posts
    591

    Default Pins

    Hello ted i,m having a problem I bought a set of shafts and pins for the baja one pin will not fit in the drive cup the section between the flats measures 15.16 mm this pin will not fit the other pins measure 14.3 mm these are fine. Is it possible for you to replace the faulty pin.

    Regards Steve wareham

  2. #2
    Formerly Silverback RC flake99please's Avatar
    Join Date
    Oct 2009
    Location
    Edinburgh, Scotland
    Posts
    3,746

    Default

    Try contacting him directly, as he does not frequent forums very much nowadays.

    ted@darksoulracing.com

  3. #3
    Senior Member
    Join Date
    Apr 2010
    Location
    durham
    Posts
    591

    Default Thanks

    Thanks for that could not find contact address .

  4. #4
    Senior Member
    Join Date
    Apr 2010
    Location
    durham
    Posts
    591

    Default Pins

    Contacted ted at darksoul usual great service new pins on the way
    Thanks ted..

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •