Results 1 to 2 of 2

Thread: BZM Flywheel Housing

  1. #1
    Senior Member BajaHusky's Avatar
    Join Date
    Jun 2011
    Location
    Scotland
    Posts
    691

    Default BZM Flywheel Housing

    Good Afternoon Kev

    I was wondering if you could possibly quote me for some machining on my new BZM Flywheel Housing please. I would like to use the same wire mesh mod that I had on my previous housing but will need the raised edges on the 3 slots machining flat in order to fit it. On the last one I drilled and tapped the holes for the mesh screen myself but wasn't as happy with the result as I could have been as it was all done by hand and I'd never tapped holes so small before, so would appreciate if you could also drill/tap the 7 x M3 holes to suit my mesh mod please as I bet you can do a much neater job.

    Here are a couple of photos which should give a clearer idea of the machining needed.





    Thanks in advance.

    Lou
    The Husky - Build Thread - Baja 5B, BZM 28.5cc TT, I-RC Chassis, TR Braces, Pro MX Clutch System, Kraken Titanium Layshaft, TR Quick Diff, UBER Ball Drive V2, I-RC Big Bores, TR Servo Saver, Hostile Rear Hubs, GH Front Hubs, Vertigo Extenders, Hostile MX Tyres, D's Brakes, Killer 7.4v LiPo, Savox 7.4v Servos, Futaba 4PK

  2. #2
    Advertiser rs fruitbat's Avatar
    Join Date
    Nov 2011
    Location
    West wales
    Posts
    914

    Default

    Pm'd you

    Flywheel lightening service, manufacturer of ,baja cage risers,piston stops ,H/D spring perches for Standard shocks and IRC shocks ,rear cuffs ,spiked wheel nuts for the baja and losi 5ive ,general machining offered for all your baja needs pm for details

    http://www.baja-forum.co.uk/forumdis...Fruitbat-Parts

    Now on Facebook

    https://www.facebook.com/groups/1594860060733732/

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •