Results 1 to 4 of 4

Thread: pullstart outerwear mod

  1. #1
    Junior Member
    Join Date
    Apr 2015
    Posts
    6

    Default pullstart outerwear mod

    Ok so im fed up of the outerwear tearing at the point where the rope goes into the pullstart so i came up with this and the problem is solved. This outerwear was brand new and after one full day bashing it was already showing signs of wear. I used a body clip plastic bung and then cut the retaining line off along with the r clip. I hope other people find this useful. You cant beat a free mod
    Attached Images Attached Images

  2. #2
    Baja-Forum Maniac coalminer's Avatar
    Join Date
    Jun 2011
    Location
    Mansfield ,Nottinghamshire
    Posts
    1,497

    Default

    Great idea mate. Mines torn too. I bet a cable grommet might work too. Cheers

  3. #3
    Baja-Forum Maniac biscuits's Avatar
    Join Date
    Feb 2012
    Location
    Dorset
    Posts
    3,663

    Default

    Like it

    I had to put a bit of rubber pipe round the bottom of those pull start handles that I got with the springs in to stop the same thing happening. Its a pain in the arse when the handle starts wrecking your outerwears. Let us know how the mod hold up

  4. #4
    Junior Member
    Join Date
    Apr 2013
    Posts
    24

    Default

    did the groove of the plastic bung goes on the upper hole section or inside?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •